SWR Power Meter For Yaesu FT857 FT897

Features:

• For Yaesu FT-857/FT-897 only.
• Clearly displays The automatic level control voltage, modulation level, standing wave ratio and supply voltage.
• High performance and super stability. And Easy to operate.

Specifications:

• Material: Metal, Plastic
• Color: white, black
• Size: about 120x90x70mm

Package Included:

• 1 PC x External S Meter/SWR/Power Meter

Receive Display Settings:

• 1, Press [FUNC] key to enter the setup menu, enable the extended menu.
• 2, Rotate [SELECT] to call up the setup menu item No-060 [MTR ARX SEL].
• 3, Rotate [DIAL] to select an external instrument display
• SIG: the input signal strength display
• CTR: Discriminator Center Meter
• VLT: battery voltage
• N / A: blank
• FS: buckle in the instrument 1mA full scale output signal calibration standard external instruments
• OFF:Turn off the meter.
• 4, press [FUNC] button to save the settings and exit the setup menu.

Emission Display Settings:

• 1, press [FUNC] key to enter the setup menu, enable the extended menu.
• 2, rotate [SELECT] to call up the setup menu item No-061 [MTR ATX SEL].
• 3, rotate [DIAL] to select an external instrument display:
• PWR: transmit power display
• ALC: Automatic Level Control voltage display
• MOD: Modulation Level Display
• SWR: SWR display
• VLT: Display Supply Voltage
• N / A: blank
• OFF: Turn off the meter.

Calibration method is as follows:

• 1, press [FUNC] key to enter the setup menu, enable the extended menu.
• 2, rotate [SELECT] to call up the setup menu item No-060 [MTR ARX SEL].
• 3, rotate [DIAL] to select FS.
• 4, with a small flathead screwdriver to adjust the calibration adjustment hole rear, so the header pointer to full scale.
• 5, the calibration is complete!

NOTE: If you can not find the numbers 60, 61 menu, is this two radio hide menu. Long press the F key to open the menu settings,
the 1st menu set to ON, press the F key to open the exit to save the hide menu.

Note:
1. Due to the light and screen difference, the item’s color may be slightly different from the pictures.
2. Please allow 0.5-2 cm differences due to manual measurement.